Ruijie Networks RG-S8605E, Hardware Installation And Reference Manual

Page: 25 / 132

Hot Swapping Supported
Management
Redundancy
Supported
EMC Standards GB9254-2008 CLASS A
Safety Standards GB4943-2011
Operating
Temperature
0 to 50°C
Storage
Temperature
-40 to 70°C
Operating Humidity 10% to 90% RH (non-condensing)
MTBF 329,000 hours
Weight Net weight: 1.68 kg
Dimensions
(W x D x H)
199 mm x 440 mm x 29.98 mm
The M8600E-CM adopts the CR2032 lithium battery. The device may explode if a wrong battery model is
used. Used batteries should be properly disposed of.
M8600E-24GT20SFP4XS-ED
Module Appearance
Figure 0-5 Appearance of the M8600E-24GT20SFP4XS-ED Module
External Port
M8600E-24GT20SFP4XS-ED provides 24 10/100/1000BASE-T RJ45 ports, 20 SFP ports and four SFP+ ports. The SFP
ports support the rate of 100/1000M and hot swapping, the RJ45 ports support auto-negotiation at 10/100/1000 Mbps,
and the SFP+ ports support 10G SFP+ modules, Gigabit SFP modules and hot swapping. Copper ports do not support
half-duplex at 10/100Mbps.
The M8600E-24GT20SFP4XS-ED supports 10G SFP+ and Gigabit SFP modules. 10G SFP+ modules
cannot be used as Gigabit SFP modules.
LED
LED
Identification on
the panel
Status Meaning
Off The module is NOT receiving power.
Solid red The module is faulty.
Blinking green
Initialization is in progress. Continuous blinking
indicates errors.
Solid green The module is operational
System LED Status
Solid yellow
System temperature exceeds the alarm
temperature, affecting system performance. But
the system continues running.
GT port LED Link/ACT Off The port link is NOT connected.