Ruijie Networks RG-S8605E, Hardware Installation And Reference Manual

Page: 42 / 132

MTBF 403,000 hours
Weight Net weight: 3.2 kg
Dimensions
(W x D x H)
399 mm x 440 mm x 40.18 mm
RG-WALL 1600-B-ED
Module Appearance
Figure 0-30 Appearance of the RG-WALL1600-B-ED Module
External Port
It provides two SFP+ ports. The SFP+ ports support 10G SFP+ modules and Gigabit SFP modules. Hot swapping of the
RG-WALL1600-B-ED , SFP and SFP+ modules is supported.
The RG-WALL1600-B-ED supports 10G SFP+ and Gigabit SFP modules. 10G SFP+ modules cannot be
used as Gigabit SFP modules.
LED
LED
Identification
on the panel
Status Meaning
Off The module is NOT receiving power.
Solid red The module is faulty.
Solid yellow
High temperature alarm. The system keeps operating
but the performance is affected.
Blinking
green Initialization is in progress. Continuous blinking
indicates errors.
System LED Status
Solid green The module is operational
Off The port link is NOT connected.
Solid green The port is connected.
SFP+ port LED in switching
mode
Link/ACT
Blinking The port is transmitting and receiving data.
Specifications
Model RG-WALL1600-B-ED
CPU: Quad-core CPU, each core with the clock speed of 1.0G
BOOTROM : 8 MB
Flash Memory : 512 MB
Management CPU
SDRAM : DDRIII 1 GB
CPU: 32-core CPU, each core with the clock speed of 1.2G
BOOTROM : 8 MB
Flash Memory : 512 MB
Service CPU
SDRAM : DDRIII 8 GB
Port Type Two SFP+ ports, supporting 10G SFP+ modules and gigabit SFP modules
Transmission
Medium
1000BASE-SX (850nm) Multi-mode optical fiber
1000BASE-LX (1310nm) Single-mode optical fiber
1000BASE-LH (1310nm) Single-mode optical fiber
1000BASE-ZX (1550nm)
Single-mode optical fiber
10GBASE-SR (850nm) Multi-mode optical fiber
10GBASE-LR (1310nm) Single-mode optical fiber