Replacing Modules
Removing, Cleaning and Installing Air Filter
After the air filter is used for a long time, the dust may block the holes on the air filter, affecting heat
dissipation and ventilation. It is recommended that the air filter be cleaned every three months.
Removing, Cleaning and Installing Air Filters for Supervisor and Service Modules
Install the air filter of the RG-S8605E supervisor and service modules:
1)
Insert the air filter along the slide rail. Pay attention to the direction instruction on the air filter.
2)
Tighten the screws on the air filter with a screwdriver.
Remove the air filter from the RG-S8605E supervisor and service modules:
1)
Loosen the captive screws on the air filter.
2) Remove the air filter.
Figure 7-1 Installing and Removing the Air Filter of the RG-S8605E Supervisor and Service Modules
Note:
A: Air filter to be removed
B: Air filter to be installed
Install the air filter of the RG-S8607E supervisor and service modules:
1)
Insert the air filter along the slide rail. Pay attention to the direction instruction on the air filter.
2)
Tighten the screws on the air filter with a screwdriver.
Remove the air filter from the RG-S8607E supervisor and service modules:
1)
Loosen the captive screws on the air filter.
2) Remove the air filter.
Figure 7-2 Installing and Removing the Air Filter of the RG-S8607E Supervisor and Service Modules
Summary of Contents for RG-S8605E
