Note:
A: Air filter to be removed
B: Air filter to be installed
Remove and Install the air filter of the RG-S8610E supervisor and service modules
1)
Hold down the buttons on both sides of the plastic cover and remove the plastic cover.
2)
Loosen the screws on the air filter.
3)
Remove the air filter.
4)
Install air filter and tighten the screws.
5)
Install the plastic cover of the air filter by pressing the buttons on both sides of the plastic cover,
Figure 7-3 Removing and Installing the Air Filter of RG-S8610E Supervisor and Service Modules
Removing, Cleaning and Installing Air Filter for Switch Fabric Module
Remove and install the air filter of the RG-S8610E switch fabric module:
1)
Hold down the buttons on both sides of the plastic cover and remove the plastic cover.
2)
Loosen the screws on the air filter.
3)
Remove the air filter.
4)
Install air filter and tighten the screws.
5)
Install the plastic cover of the air filter by pressing the buttons on both sides of the plastic cover,
Summary of Contents for RG-S8605E
