Ruijie Networks RG-S8605E, Hardware Installation And Reference Manual

Page: 113 / 132

Figure 7-4 Installing and Removing the Air Filter of the RG-S8610E Switch Fabric Module
Removing Swappable Interface Modules (Optional)
Removing SFP+/SFP Modules
Take the following steps to remove SFP/SFP+ modules:
1) Unplug the optical fiber.
2) Turn down the handle of the module until it is horizontal. Pull the tap to take out the SFP/SFP+ module, as shown in
figure 7-5.
Figure 7-5 Removing the SFP/SFP+ Module
Precaution
 Unplug the optical fiber before removing the module.

Do not pull out the module forcefully without turning down the handle of the module.
 Immediately install the dust plug to the module port and the switch fiber port.
Removing SFP+ Cables
Pull the tap out and unlock the module. Take out the SFP+ module gently, as shown in figure 7-6
Figure 7-6 Removing the SFP+ Cable