RS PRO AFG-31000 Series Instruction Manual Download

Page: 308 / 361

AFG-31000 Series Instruction Manual/English

306

22/11/2016 Version No. 002

Description

Use the SOURce[1]:FUNCtion USER command to output the

arbitrary waveform currently selected in memory. The waveform is

output with the current frequency, amplitude and offset settings.

Syntax

SOURce[1]:FUNCtion USER

Example

SOUR1:FUNC USER

Selects and outputs the current waveform in memory.

DATA:DAC

Source Specific

Command

Description

The DATA:DAC command is used to download binary or decimal

integer values into memory using the IEEE-488.2 binary block format

or as an ordered list of values.

Note

The integer values (±32767) correspond to the maximum and

minimum peak amplitudes of the waveform. For instance, for a

waveform with an amplitude of 5Vpp (0 offset), the value 32767is the

equivalent of 2.5 Volts. If the integer values do not span the full

output range, the peak amplitude will be limited.

The IEEE-488.2 binary block format is comprised of three parts:

# 7 2097152

1. Initialization character (#)

2. Digit length (in ASCII) of the number

of bytes

3. Number of bytes

IEEE 488.2 uses two bytes to represent waveform data (16 bit

integer). Therefore the number of bytes is always twice the number of

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands