RS PRO AFG-31000 Series Instruction Manual Download

Page: 345 / 361

REMOTE INTERFACE

22/11/2016 Version No. 002

343

Description

The error queue is queried using the SYSTem:ERRor? command.

The Error queue will set the “Error Queue“ bit in the status byte

error queue is full the last message will generate a “Queue overflow”

error and additional errors will not be stored. If the error queue is

empty, “No error” will be returned.

Error messages are stored in the error queue in a first-in-first-out

order. The errors messages are character strings that can contain up

to 255 characters.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands