RS PRO AFG-31000 Series Instruction Manual Download

Page: 201 / 361

ARBITRARY WAVEFORMS

22/11/2016 Version No. 002

199

Note: Changing the length will change the duty/ frequency of pulse

waveforms.

4. Press F5 (Infinite) to output the arbitrary

waveform infinitely.

Infinite

F 5

5. Press F6 (Return) to return to the

previous menu.

Return

F 6

Below an infinite pulse waveform is output from the front panel

terminal.

Output Markers

Panel Operation

1. Press the ARB key.

ARB

2. Press F6 (Output).

Output

F 6

3. Press F3 (Marker).

Marker

F 3

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands