RS PRO AFG-31000 Series Instruction Manual Download Page 187

Page: 187 / 361

ARBITRARY WAVEFORMS

22/11/2016 Version No. 002

185

Editing an Arbitrary Waveform

Adding a point to an Arbitrary Waveform

Background

The AFG-31000 has a powerful editing function that allows you to

create points or lines anywhere on the waveform.

Panel Operation

1. Press the ARB key.

ARB

2. Press F2 (Edit).

Edit

F 2

3. Press F1 (Point).

Point

F 1

4. Press F1 (Address).

Address

F 1

5. The Address parameter will become highlighted in red.

6. Use the selector keys and scroll wheel

or number pad to enter the Address

value.

7. Press F5 (Enter) to save settings.

Enter

F 5

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands