RS PRO AFG-31000 Series Instruction Manual Download

Page: 336 / 361

AFG-31000 Series Instruction Manual/English

334

22/11/2016 Version No. 002

Query Errors

-410 Query INTERRUPTED

Indicates that a command was received but the data in the output buffer

from a previous command was lost.

-420 Query UNTERMINATED

The function generator is ready to return data, however there was no

data in the output buffer. For example: Using the APPLy command.

-430 Query DEADLOCKED

Indicates that a command generates more data than the output buffer

can receive and the input buffer is full. The command will finish

execution, though all the data

won’t be kept.

Arbitrary Waveform Errors

-770 Nonvolatile arb waveform memory corruption detected

Indicates that a fault (check sum error) has occurred with the non-

volatile memory that stores the arbitrary waveform data.

-781 Not enough memory to store new arb waveform; bad sectors

Indicates that a fault (bad sectors) has occurred with the non-volatile

memory that stores the arbitrary waveform data. Resulting in not

enough memory to store arbitrary data.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands