RS PRO AFG-31000 Series Instruction Manual Download

Page: 197 / 361

ARBITRARY WAVEFORMS

22/11/2016 Version No. 002

195

Output an Arbitrary Waveform

Up to 1 Mpts (0~1048575) of an arbitrary waveform can be output from the function generator.

Arbitrary waveforms can also be output for a defined or infinite amount of cycles.

The output can also be output as pulse widths from the marker output.

Output an Arbitrary Waveform

Panel Operation

1. Press the ARB key.

ARB

2. Press F6 (Output).

Output

F 6

3. Press F1 (Start).

Start

F 1

4. The Start property will become highlighted in red.

5. Use the selector keys and scroll wheel

or number pad to enter the Start

address.

6. Press F5 (Enter) to confirm the Start

point.

Enter

F 5

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands