RS PRO AFG-31000 Series Instruction Manual Download Page 206

Page: 206 / 361

AFG-31000 Series Instruction Manual/English

204

22/11/2016 Version No. 002

3. Press F1 (Start).

Start

F 1

4. The Start property will become highlighted in red.

5. Use the selector keys and scroll wheel

or number pad to enter the Start

address.

6. Press F5 (Enter) to confirm the Start

point.

Enter

F 5

7. Press F6 (Return) to return to the

previous menu.

Return

F 6

8. Repeat steps 4~8 for Length (F2).

Length

F 2

1. Press F4 (USB).

USB

F 4

2. Use the scroll wheel to navigate the

filesystem.

3. Press Select to select directories or file

names.

Select

F 1

Create a Folder

4. Press F2 (New Folder).

New Folder

F 2

5. The text editor will appear with a default folder name of

“NEW_FOL”.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands