RS PRO AFG-31000 Series Instruction Manual Download

Page: 191 / 361

ARBITRARY WAVEFORMS

22/11/2016 Version No. 002

189

4. Press F1 (Start).

Start

F 1

5. The Copy From properties will become highlighted in red.

6. Use the selector keys and scroll wheel

or number pad to enter the Copy From

address.

7. Press F5 (Enter) to save settings.

Enter

F 5

8. Press F6 (Return) to return to the

previous menu.

Return

F 6

9. Repeat steps 4~8 for Length (F2) and Paste To (F3).

10. Press F5 (Done) to confirm the

selection.

Done

F 5

11. Press F6 (Return) to return to the

previous menu.

Return

F 6

A section of the waveform from points 50~80 was copied to

points 100~130:

Copy From: 50

Length: 30

To: 100

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands