RS PRO AFG-31000 Series Instruction Manual Download Page 150

Page: 150 / 361

AFG-31000 Series Instruction Manual/English

148

22/11/2016 Version No. 002

System and Settings

There are a number of miscellaneous settings such as language options, output impedance

settings, DSO link, and firmware settings that can be configured.

Viewing and Updating the Firmware Version

Panel Operation

1. Press the UTIL key.

UTIL

2. Press F3 (Cal.).

Cal.

F 3

3. Press F2 (Software).

Software

F 2

View Version

4. To view the firmware version, press

F1(Version)

Version

F 1

The version information will be shown on screen:

Instrument, Version, FPGA Revision, Bootload version

Update Firmware

5. To update the firmware, insert a USB

flash drive with a firmware file in the

USB host drive. Press F2 (Upgrade).

Upgrade

F 2

Note

The firmware file (*.bin) must be located in a directory named

UPGRADE, directly off the USB root directory. UPGRADE must be all

capitals.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands