RS PRO AFG-31000 Series Instruction Manual Download

Page: 16 / 361

AFG-31000 Series Instruction Manual/English

22/11/2016 Version No. 002

UTIL

The UTIL key is used to access the save and

recall options, set the remote interface (USB,

GPIB, RS232), use DSO link, update and view

the firmware version, access the calibration

options, output impedance settings, set the

language and access the help menu.

ARB

ARB is used to set the arbitrary waveform

parameters.

MOD

Sweep

Burst

The MOD, Sweep and Burst keys are used to

set the modulation, sweep and burst settings

and parameters.

Preset

The preset key is used to recall a preset state.

Output key

Output

The Output key is used to turn on or off the

waveform output.

Output indicators

When an Output indicator is green, it indicates

that the output is active.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands