RS PRO AFG-31000 Series Instruction Manual Download Page 209

Page: 209 / 361

ARBITRARY WAVEFORMS

22/11/2016 Version No. 002

207

4. Use the scroll wheel to navigate the

filesystem.

5. Press Select to select directories or file

names.

Select

F 1

6. Press F3 (To) to choose the starting

point for the loaded waveform.

F 3

The “Load To” property will become highlighted in red.

8. Use the selector keys and scroll wheel

or number pad to enter the starting

point.

9. Press F5 (Enter) to confirm the Start

point.

Enter

F 5

10. Press F6 (Return) to go back to the

previous menu.

Return

F 6

11. Press F5 (Done).

Done

F 5

Below the file ARB1 is selected using the scroll wheel loaded to

position 0.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands