RS PRO AFG-31000 Series Instruction Manual Download

Page: 111 / 361

MODULATION

22/11/2016 Version No. 002

109

PWM Source

The AFG-31000 accepts internal and external PWM sources. Internal is the default source for

PWM sources.

Panel Operation

1. Press the MOD key.

MOD

2. Press F4 (PWM).

PWM

F 4

3. Press F1 (Source).

Source

F 1

4. To select the source, press F1 (Internal)

or F2 (External).

INT

F 1

EXT

F 2

5. Press F6 (Return) to return to the menu.

Return

F 6

External Source

Use the MOD INPUT terminal on the rear

panel when using an external source.

MOD

±5V

Note

If an external modulation source is selected, pulse width modulation

is controlled by the ± 5V from the MOD INPUT terminal on the rear

panel. For example, if modulation depth is set to 100%, then the

maximum pulse width occurs at +5V, and the minimum pulse width at

-5V.

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands