RS PRO AFG-31000 Series Instruction Manual Download

Page: 155 / 361

SECONDARY SYSTEM FUNCTION SETTINGS

22/11/2016 Version No. 002

153

Screen Capture

Background

The function generator is able to capture screen shots and save

them to a USB flash drive.

Connection

1. Insert a USB key into the USB port

on the front panel.

Panel Operation

2. Press the UTIL key.

UTIL

3. Press F5 (System).

System

F 5

4. Press F1 (Hardcopy).

Hardcopy

F 1

5. Use the scroll wheel to scroll

through the different screen shots.

A screen shot is captured each time

a function is used.

Function: Waveform, ARB, MOD

(AM, FM, FSK, PWM), Sweep,

Burst, UTIL

6. When a screen is selected, press

F1 to save the screen shot. The

utility menu will reappear after 2

seconds. This indicates that the

screen shot was saved.

F 1

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands