RS PRO AFG-31000 Series Instruction Manual Download

Page: 84 / 361

AFG-31000 Series Instruction Manual/English

22/11/2016 Version No. 002

5. Use the selector keys and scroll wheel

or number pad to enter the AM depth.

6. Press F1 (%) to choose % units.

F 1

Range

Depth

0%~120%

Default depth

100%

Note

When the modulation depth is greater than 100%, the output cannot

exceed ±5VPeak (10k

Ω load).

If an external modulation source is selected, modulation depth is

limited to ± 5V from the MOD INPUT terminal on the rear panel. For

example, if modulation depth is set to 100%, then the maximum

amplitude is +5V, and the minimum amplitude is -5V.

Selecting (AM) Modulation Source

The function generator will accept an internal or external source for AM modulation. The

default source is internal.

Panel Operation

1. Press the MOD key.

MOD

2. Press F1 (AM).

F 1

3. Press F1 (Source).

Source

F 1

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands