RS PRO AFG-31000 Series Instruction Manual Download

Page: 322 / 361

AFG-31000 Series Instruction Manual/English

320

22/11/2016 Version No. 002

Error Messages

The AFG-31000 has a number of specific error codes. Use the SYSTem:ERRor command to

recall the error codes. For more information regarding the error queue, see page 342.

Command Error Codes

-101 Invalid character

An invalid character was used in the command string. Example: #, $, %.

SOURce1:AM:DEPTh MIN%

-102 Syntax error

Invalid syntax was used in the command string. Example: An

unexpected character may have been encountered, like an unexpected

space.

SOURce1:APPL:SQUare , 1

-103 Invalid separator

An invalid separator was used in the command string. Example: a

space, comma or colon was incorrectly used.

APPL:SIN 1 1000 OR SOURce1:APPL:SQUare

-108 Parameter not allowed

The command received more parameters than were expected.

Example: An extra (not needed) parameter was added to a command

SOURce1:APPL? 10

-109 Missing parameter

Summary of Contents for AFG-31000 Series










































































































































































































































































































































































Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands

RS PRO AFG-31000 Series, Instruction Manual

Search results

Summary of Contents for AFG-31000 Series

Reviews:

Related manuals for AFG-31000 Series

Brands by name

Popular brands