Ross Opengear UDC-8625A Series, User Manual, Page: 84 / 174

6–6 • Audio Configuration UDC-8625A Series User Manual (Iss. 11)
4.
To apply a gain to a channel, use the associated Ch # slider to select a value between
-20dB and 20dB. Repeat for each channel you wish to configure.
5.
To invert a channel, select the associated Ch # Invert box.
6.
If required, repeat steps 2. to 5. for the second input.
Configuring the Audio Groups
The embedded output channels are configured per processed input to allow different audio
mapping that will track the currently processed input. For example, you may choose to embed
audio from AES inputs when processing Input 1, but pass embedded audio when processing Input
2.
To configure embedded audio for an input source
1.
From the Device View , select the Embedded Audio Selection tab.
Embedded Audio Selection Tab — Input 1 Selected
2. From the Embedded Audio Selection tab, select the sub-tab for the input source you
wish to configure.
3. To map a channel:
• From the associated Ch # Source menu, select an audio source.
• If the selected source is not present on the input video, silence is embedded.
4. To reset the settings of a group to pass the input channels to the output channels, click
Pass for the specific group.
5. To insert test tones:
• Click Insert Tones to insert test tones into the specified group.
Note
— Channel status bits are only passed when a left/right pair are not separated.
Otherwise, a standard channel status will be inserted. When channel status is
passed, it may not reflect a change between 20bit and 24bit.