Ross Opengear UDC-8625A Series, User Manual, Page: 112 / 174

9–8 • Appendix A. DashBoard Menus UDC-8625A Series User Manual (Iss. 11)
Output Setup
Output # Test Pattern
Specifies to use a test pattern for the
output
Loss Of Input
Black*
Sets the output to black when there is a
loss of input
Blue
Sets the output to blue when there is a loss
of input
Freeze
Enables the card to freeze and output the
last good frame of video before the loss of
input. Sets the output to freeze the last
valid frame of video if there is a loss of
input.
Trouble Slide
Sets the output to the trouble slide when
there is a loss of input. The trouble slide is
configured on the
Logos > Trouble Slide
tab.
Disable Keys on Loss
of Input
Selected
Disables the key overlays during a loss of
input signal
Cleared
The key overlays display during a loss of
input
Test Pattern
Matte*
Specifies the type of test pattern to output.
Note that the test pattern replaces all of the
output picture, including the Wings and
key sources, but not the HANC (audio)
and VANC.
Black
75% Bars
SMPTE Bars
100% Bars
Output Horizontal
Delay (Clocks)
c
0 to #
d
Sets the output horizontal delay (in
clocks) relative to the selected reference
Output Vertical Delay
(Lines)
a
0 to #
b
Sets the output vertical delay (in lines)
relative to the selected reference
Output Frame Delay
(Frames)
e
0 to 2
b
(interlaced format)
0 to 6
b
(progressive format)
Specifies the output delay in number of
frames, however the actual processing
delay is displayed in the
Output Frame
Delay field in the Signal tab
Output Delays
Reset
c
Sets the delay values to 0
Dithering
Disabled Dithering feature is disabled
Enabled low (2bits~0.4%) Dithering is enabled and set to 2bits
Enabled med (3bits~0.8%) Dithering is enabled and set to 3bits
Enabled high (4bits~1.6%) Dithering is enabled and set to 4bits
Clip at Black
f
Selected
Enables the card to clip to SMPTE black
on all outputs
Cleared* SuperBlack is passed
Clip at White
e
Selected
Enables the card to clip to SMPTE white
on all outputs
Cleared* SuperWhite is passed
Table 9.4 Video Menu Items
Menu Title Item Parameters Description