Ross Opengear UDC-8625A Series, User Manual, Page: 25 / 174

UDC-8625A Series User Manual (Iss. 11) Installation • 2–5
Card Installation
This section provides a brief overview of the physical installation of the UDC-8625A series
cards. The procedure for installing a rear module and card is the same regardless of the rear
module and frame used. However, the rear module you install depends on the frame and the
features you require.
Supported Rear Modules
For cabling designations, refer to the applicable section in this chapter.
UDC-8625A Rear Modules
The UDC-8625A supports the following rear modules:
• DFR-8310 series frames — The 8310AR-033 rear module is required. The 8310AR-033
provides four SDI inputs, four SDI outputs, eight GPIOs, a reference input, a serial port,
and an ethernet port. The 8310AR-033 includes a bypass relay between SDI IN 1 and
SDI OUT 1. Due to this relay, this rear module is not suitable for 3G signals (1080p
format).
• DFR-8321 series frames and OG3-FR series frames — The 8320AR-041,
8320AR-033, the 8320AR-052 , and the 8320AR-055 are supported.
› The 8320AR-041 rear module provides four SDI inputs, four SDI outputs, and a
reference input.
› The 8320AR-033 , the 8320AR-052 , and the 8320AR-055 rear modules each provide
four SDI inputs, four SDI outputs, eight GPIOs, a reference input, a serial port, and
an ethernet port. The 8320AR-033
1
and 8320AR-055 include a bypass relay between
SDI IN 1 and SDI OUT 1. The 8320AR-052 rear module does not have a bypass
relay.
• OG3-FR series frames — The 8322AR-065 can be used. This rear module provides one
analog reference input, three SDI inputs, three SDI outputs, and eight GPIOs. There is no
bypass relay available on this rear module. Note that this rear module is not compatible
with the DFR-8321 series or DFR-8310 series frames.
UDC-8625A-A Rear Modules
When installing the UDC-8625A-A in the DFR-8321 series frame or the OG3-FR series frames,
the following rear modules are supported:
• 8320AR-053A — This rear module provides one analog reference input, four SDI inputs,
four SDI outputs, four GPIOs, eight AES-3id DIN connections, a serial port, and an
ethernet port. There is no bypass relay available on this rear module.
• 8320AR-053B — This rear module provides one analog reference input, four SDI inputs,
four SDI outputs, four GPIOs, eight AES-3id HD-BNC connections, a serial port, and an
ethernet port. There is no bypass relay available on this rear module.
Note
— The DFR-8310 series frame does not support the UDC-8625A-A or the
UDC-8625A-B.
1. Due to this relay, the 8320AR-033 rear module is not suitable for 3G signals (1080p format).