Ross Opengear UDC-8625A Series, User Manual, Page: 121 / 174

UDC-8625A Series User Manual (Iss. 11) Appendix A. DashBoard Menus • 9–17
Output
Settings -
AFD Code
4:3
Letterbox 16:9, top, 0010
• This menu is only used for 4:3 SD
outputs if the ARC Mode is set to
Forced Output
• Refer to the section “ Overview ” on
page 4-2 for more information
Letterbox 14:9, top, 0011
Letterbox>16:9, center, 0100
Full frame 4:3, 1000*
Full frame 4:3, 1001
Letterbox 16:9, center, 1010
Letterbox 14:9, center, 1011
Full frame 4:3, alter 14:9, 1101
Letterbox 16:9, alter 14:9, 1110
Letterbox 16:9, alter 4:3, 1111
Output
Settings
16:9
Full frame 16:9, 0010
• This menu is only used for 16:9 SD, HD,
or 3G outputs if the ARC Mode is set to
Forced Output
• Refer to the section “ Overview ” on
page 4-2 for more information
Pillarbox 14:9, center, 0011
Letterbox >16:9, center, 0100
Full frame 16:9, 1000*
Pillarbox 4:3, center, 1001
Full frame 16:9, protected, 1010
Pillarbox 14:9, center, 1011
Pillarbox 4:3, alter 14:9, 1101
Full frame 16:9, alter 14:9, 1110
Full frame 16:9, alter 4:3, 1111
SD Blank # Active
Lines
0 to 6*
Selects the number of lines at the top of
the production aperture to blank. Only
applies to SD inputs. This is used to
remove VBI signals from the input
picture.
Extra Options
Set Output Format
Selected
Sets the output video signal to the
specified format when the profile is
recalled
Cleared* Disables this feature
#
Specifies the video format to output when
the profile is recalled
Reset Profile
Returns all editable parameters of the
profile to the factory default values
a. The Video Index settings are ignored when using 3G or HD signals.
Table 9.13 Profile Menu Items
Menu Title Item Parameters Description