Ross Opengear UDC-8625A Series, User Manual, Page: 16 / 174

1–6 • Introduction UDC-8625A Series User Manual (Iss. 11)
Format Conversion
The UDC-8625A series provides up-conversion, down-conversion, and cross-conversion. The
card converts the incoming video to any supported video format and incorporates a video frame
synchronizer to allow the output video to be timed to an external video reference.
The UDC-8625A series can cleanly switch between SDI IN 1 and SDI IN 2 for conversion. The
two sources do not have to be the same format. SDI IN 3 and SDI IN 4 do not offer format
conversion. Using advanced video de-interlacing algorithms, and full 10bit processing, format
conversion is performed with the highest possible picture quality. As part of the format
conversion process, a flexible aspect ratio converter allows the video to be re-sized to a number of
standard aspect ratios.
Supported Format Conversions
This section provides a summary of the supported formats for conversion available for the
UDC-8625A series. (
Table 1.1 ) Note that if an unsupported format is received, an alarm message
is displayed in the Video Processing Output field of the Signal tab.
Table 1.1 Supported Conversion Formats
Input Formats
Output Formats
480i
59.94
720p
59.94
1080
i 59.94
1080p
59.94 L
vl
A
576i 50
720p 50
1080i 50
1080p 5
0 Lvl
A
480i 59.94
   
720p 59.94
   
1080i 59.94
   
1080p 59.94 Lvl A
   
576i 50
   
720p 50
   
1080i 50
   
1080p 50 Lvl A
   