Ross Opengear UDC-8625A Series, User Manual, Page: 98 / 174

8–6 • Operation UDC-8625A Series User Manual (Iss. 11)
Logo Setup
The Logos tab in DashBoard allows you to adjust the position and play modes of media files. The
following features are supported:
• Auto Play — When enabled, the animation will play from the first frame when it is
brought to air. When disabled, bringing the animation to air does not affect playback.
• Looping — When enabled, the animation will cycle continuously (from the last frame
back to the first) in an endless loop. When disabled, the animation plays once, and freezes
on the last frame.
• Hold Time — When enabled, the animation will play, but before looping back (if
looping is enabled), it pauses on the last frame, for the specified Hold Time (in frames).
For More Information on...
• the options in the Logos tab, refer to Table 9.20 on page 9-26.
To adjust the on-air properties of a media file
1. Load a media file as outlined in the section “ Loading a Media File ” on page 7-5.
2. Adjust the position of a still image in the viewing area of the screen using the X Position
and Y Position sliders
.
3. Adjust the characteristics of an animation using the Auto Play , Looping , and Hold
Time options.
4. Specify how an image is displayed by selecting an option from the Play Mode menu.
Note
— Refer to the UDC-8625A Release Notes for information on managing the
media files on your CompactFlash™ card.
Note
— The Play Mode feature only applies to Interlaced video formats and has no
effect when using Progressive video formats.