Ross Opengear UDC-8625A Series, User Manual, Page: 126 / 174

9–22 • Appendix A. DashBoard Menus UDC-8625A Series User Manual (Iss. 11)
AES Inputs Menus
Table 9.17 summarizes the AES inputs setup options available in DashBoard for the
UDC-8625A-A and UDC-8625A-B. Note that the number of AES inputs available depends on
how the AES IO Config is set (see
Table 9.10 ).
Table 9.17 AES Inputs Menu Items
Option Title Item Parameter Description
Input #- # —
AES #
Sample Rate
Conversion
Selected* SRC is always used on the specified input
Cleared
SRC is not used on the specified input. Select
this option when using non-PCM audio data.
Ch # Gain (dB)
-20 to +20
a
a. The default value is 0.
Adjusts the gain of the specified audio channel
Gain Lock
Selected*
Locks the Gain slider of both channels
together. If the values for the two channels are
different, that change is maintained when the
channels are locked.
Cleared Unlocks the Ch # Gain slider
Ch # Delay (ms) 0* to 500
Adjusts the delay of the specified audio
channel
Delay Lock
Selected*
Locks the Ch Delay slider of both channels
together. If the values for the two channels are
different, that change is maintained when the
channels are locked.
Cleared Unlocks Ch # Delay slider
Ch # Invert
Selected
Inverts the audio signal of the specified
channel
Cleared The audio signal is not inverted
Sum
Selected
Both channels will carry the average of the two
input channels (A+B/2). When the input is
summed, the original signals are no longer
available for output.
Cleared* Disables this feature
Input Reset
Resets the parameters for the selected input to
the default values
All Inputs Reset
Resets the input parameters to the default
values