Ross Opengear UDC-8625A Series, User Manual, Page: 81 / 174

UDC-8625A Series User Manual (Iss. 11) Audio Configuration • 6–3
Configuring the AES Inputs
This section briefly summarizes how to configure the options in the AES Inputs tab when the
AES I/O Config is set to 8 in, 0 out or 4 in, 4 out.
For More Information on...
• the options available in the AES Inputs tab, refer to Table 9.17 on page 9-22.
To configure the AES inputs
1. From the Device View , select the AES Inputs tab.
AES Inputs Tab — AES IO Config Set to 4 in, 4 out
2. If required, select the sub-tab that includes the AES source you wish to configure.
3. To set the gain for a channel of an AES source, use the associated Ch # Gain slider to
select a value between -20dB and 20dB.
4. To set the delay for a channel of an AES source, use the associated Ch # Delay slider to
select a value between 0ms and 500ms.
5. To invert a channel of an AES source, select the associated Ch # Invert box.
6. To sum the input (A+B/2) of the AES source, select the Sum box.
7. Repeat steps 2.- 6. for each AES source you wish to configure.
8. To enable the SRC of the AES source, select the Sample Rate Conversion box.