Ross Opengear UDC-8625A Series, User Manual, Page: 136 / 174

9–32 • Appendix A. DashBoard Menus UDC-8625A Series User Manual (Iss. 11)
Input Status Menus
Table 9.24 summarizes the Input Status read-only information available in DashBoard. Each
input has a sub-tab that displays the applicable status information.
Note
— If the output format frame rate is greater than the input frame rate, the fields
in this tab may temporarily report “Not Present”.
Table 9.24 Input # Status Menu Items
Menu Title Item Parameters Description
Input # Status
a
Format # Indicates the detected input format
No Signal (Red)
The input signal is not detected and the corresponding
Input # Loss alarm is enabled
Unsupported: Format # The input format is not supported
Incompatible: Format #
(Yellow)
The input format is not compatible with the output,
and is currently not in use; the corresponding alarm is
enabled
Alarm suppressed
(Green) The input format is compatible and/or the
corresponding alarm is disabled
Audio Status - Audio
Absent (Yellow) There is an audio group absent in the input and the
corresponding alarm is enabled
Audio Status
A blank field indicates that all audio groups in the
input are present or the corresponding alarm is
disabled
CRC Errors
Active:# Full # (SD
only) Displays the count of the CRC errors on the video
input. This counter is reset on loss of video, or by user
request. The counter is non-latching, and the count
can roll over the counter.
• For SD formats, it displays both active picture and
full frame errors
• For HD formats, it displays the total count of errors
# (HD only)
Error Count Reset Resets the CRC Errors field
ANC
352M
Not Present 352M is not detected on the input
# 352M is detected and the 4 bytes are displayed
AFD
b
Not Present AFD Code is not detected in the input
# coded frame: AFD
Code
AFD Code is detected in the input
Video Index
Not Present VI data is not detected
# coded frame: AFD
Code (Line #) VI data was detected, and the AFD Code and line it
was detected on
Closed
Captioning
c
Line 21
Line 21 data is detected on the first field; 480i
59.94Hz format only
Line 284
Line 21 data on the second field is detected; 480i
59.94Hz format only
EIA-708 pkt
(CEA-608 data)
EIA-708 packet is detected; contains CEA-608 data