Ross Opengear UDC-8625A Series, User Manual, Page: 15 / 174

UDC-8625A Series User Manual (Iss. 11) Introduction • 1–5
UDC-8625A-A and UDC-8625A-B Block Diagram
Figure 1.2 outlines the workflow of the UDC-8625A-A when using the 8320AR-053A Rear
Module. When using the 8320AR-053B Rear Module, HD-BNC connectors are available. When
using the UDC-8625A-B, the 8320AR-052A Rear Module provides WECO™ connectors.
Figure 1.2 UDC-8625A-A and UDC-8625A-B — Simplified Block Diagram
Key and Fill
Clean Feed 2
Clean Feed 1
Proc
CARD
CONTROL
Local Area
Network
GENLOCK
Local Reference
† Frame sync function is always enabled on SDI IN 1 and SDI IN 2. Note that SDI IN 3 and SDI IN 4 are limited to line sync when the output is 3G.
* Note that the number of AES inputs and outputs is dependent on how the AES IO Config is set: 8 in and 0 out, 4 in and 4 out, 0 in and 8 out.
SDI IN 1
SDI IN 2
SDI IN 3
SDI IN 4
†
†
EMBEDDED
AUDIO
INPUT
PROCESSING
Requires the audio daughter card and the appropriate rear module.
AES
INPUT
PROCESSING
AES SOURCE
SELECTION
AES AUDIO*
AES AUDIO*
ANC PROC
AFD
AES
OUTPUT
PROCESSING
SDI OUT 4
SDI OUT 3
SDI OUT 2
SDI OUT 1
EMBEDDED AUDIO
SOURCE SELECTION