Ross Opengear UDC-8625A Series User Manual Download Page 41

Page: 41 / 174

UDC-8625A Series User Manual (Iss. 11)

Configuration • 3–1

Configuration

In This Chapter

This chapter provides instructions for configuring the UDC-8625A series cards using the options
available in DashBoard. For information on configuring the AES sources and embedded audio
groups, refer to the chapter “

Audio Configuration

” on page 6-1.

The following topics are discussed:

• Using DashBoard
• Ethernet Communication Setup
• Selecting the Reference Source
• Configuring the Video Outputs
• Setting up GPI/Tally Communications
• Configuring the Transition Buttons
• Configuring the Input Signal Timing Display
• Configuring the Loss of Input Behavior
• Configuring the Edit Permissions
• Software Upgrades
• Loading the Factory Defaults
• Using DataSafe

Operating Tip

— Wait 30 seconds after the last setting change to ensure all

changes are saved to the non-volatile memory of the card.

Note

— Before proceeding, ensure that you are running DashBoard software

version 6.2.0 or higher. You can download the DashBoard software and manual from
the Ross Video website.

Summary of Contents for Opengear UDC-8625A Series















































































































































































Search results

Summary of Contents for Opengear UDC-8625A Series

Reviews:

Ross Opengear UDC-8625A Series, User Manual, Page: 41 / 174

Search results

Summary of Contents for Opengear UDC-8625A Series

Reviews: