Ross Opengear UDC-8625A Series, User Manual, Page: 50 / 174

3–10 • Configuration UDC-8625A Series User Manual (Iss. 11)
Configuring the Input Signal Timing Display
The Timing Display feature enables you to configure how the input signal timing is reported by
DashBoard. This information is displayed in the individual Input Timing fields of the Signal tab.
The timing display reports the delay of the input signals in output format clocks and lines.
To configure the input signal timing for your card
1. From the Device View in DashBoard, select the Config tab.
2. Select the Personality tab located at the bottom of the Config tab.
Config Tab — Personality Tab
3. Configure how the signal timing by selecting one of the following options from the
Timing Display menu.
• Relative to Reference — Select this option to display the timing offset values of
the SDI inputs relative to the selected reference as follows:
› A negative offset value indicates that the SDI signal is earlier than the
reference.
› A positive value indicates that the SDI signal is later than the reference.
• Input to Output — Select this option to display the timing offset values of the SDI
inputs relative to the SDI output of the card as follows:
› A negative offset value indicates that the SDI input signal is earlier than the
SDI output signal.
› A positive value indicates that the SDI input signal is later than the SDI output
signal.