Ross Opengear UDC-8625A Series, User Manual, Page: 56 / 174

3–16 • Configuration UDC-8625A Series User Manual (Iss. 11)
Loading the Factory Defaults
If required, the card menu parameters can be reset to the factory default values using the option
available in the
Load/Save tab.
To reset the card to the factory default configuration in DashBoard
1. From the Device View , select the Config tab.
2. Select the Load/Save tab located at the bottom of the Config tab.
3. From the Global Settings area, click Load Factory Defaults to display the Confirm
dialog.
4. Click Yes to load the factory default values for all menu parameters, or No to cancel the
load and close the dialog.
Note
— Ethernet settings, reference selection, and the output formats are not reset
using this method.