UDC-8625A Series User Manual (Iss. 11)
Operation • 8–3
Key 1 Wings Setup
Use the following procedure to set up the Key 1 Wings for your UDC-8625A series card:
1.
If using an internal source, configure the logo channels as outlined in the section “
2.
If using an external source, ensure the video format of the Wings video input matches
the output format selected in the
Output Format
field of the
Video
tab.
3.
From the
Device View
in DashBoard, select the
On Air Control
tab.
4.
Locate the
Key 1
area in the
On Air Control
tab. This area provides the options for
configuring the Wings feature of your card output.
5.
From the
Key 1
Source
menu, specify a source for the Wings feature. Refer to
on page 9-29 for a list of options.
On Air Control Tab
Note
— Key 1 Wings does not have options in the
Key Setup
tab because the Mask
is automatically set according to the aspect ratio conversion.
Summary of Contents for Opengear UDC-8625A Series
