Ross Opengear UDC-8625A Series, User Manual, Page: 31 / 174

UDC-8625A Series User Manual (Iss. 11) Installation • 2–11
UDC-8625A-A Cabling
Note that when the card is configured as 4 in and 4 out , the AES 1-4 connections are the inputs
and the AES 5-8 connections are the outputs. Each rear module occupies four slots in the frame
and accommodates one card.
8320AR-053A Cabling
Figure 2.10 outlines the cabling designations when using the 8320AR-053A rear module.
Figure 2.10 Cable Connections for the 8320AR-053A
8320AR-053B Cabling
Figure 2.11 outlines the cabling designations when using the 8320AR-053B rear module.
Figure 2.11 Cable Connections for the 8320AR-053B
GPIO 1
GPIO 2
X
SDI IN 4 AES 3
AES 5
AES 7
SDI OUT 2
SDI OUT 4
ANLG
REF IN
SDI OUT 1
SDI OUT 3
SDI IN 2 SDI IN 3 AES 1 AES 2
ETHERNET
10/100
SERIAL
(RS-232/RS-485)
AES 4
AES 6
AES 8
GPIO 4
GPIO 3
SDI IN 1
1
5
3
2
4
6
8
9
7
X
SDI IN 4 AES 3
AES 5
AES 7
SDI OUT 2
SDI OUT 4
ANLG REF IN
SDI OUT 1
SDI OUT 3
SDI IN 2 SDI IN 3 AES 1 AES 2
GPIO 4
GPIO 3
ETHERNET
10/100
SERIAL
(RS-232/RS-485)
AES 4
AES 6
AES 8
GPIO 1
GPIO 2
SDI IN 1
1
5
3
2
4
6
8
9
7