Ross Opengear UDC-8625A Series, User Manual, Page: 108 / 174

9–4 • Appendix A. DashBoard Menus UDC-8625A Series User Manual (Iss. 11)
Signal
Input # Status
Format # (Green) Indicates the detected input format
Format # - No Signal
(Red) The input signal is not detected and the
corresponding Input # Loss alarm is enabled
Error - Unsupported (Red)
The input format is incompatible with the
output format and the corresponding Input #
Loss alarm is enabled
Error - Incompatible
(Yellow)
The input format is incompatible with its
selected function (Wings, key video, key
alpha) such as the input format does not
match output format. If an input is not
selected for one of these functions, no error is
indicated. The corresponding Input # Loss
alarm is enabled.
Alarm Suppressed
Displayed if one or more of the first three
error conditions above exist, but the
corresponding alarm is disabled
Output Frame Delay
(frames)
0-3
c
Indicates the current processing time of the
card
AES Status
OK (Green)
Indicates the status of the audio source.
Information reported in this field is dependent
on the options configured in the Alarms tab.
Input Absent (Yellow)
Channel Silent (Yellow)
Output Source Absent
(Yellow)
Timing Display
Relative to Reference
The Input Timing fields display the input
signal timing values relative to the selected
reference
Input to Output
The Input Timing fields display the input
signal timing values relative to the SDI output
of the card
Input # Timing ## Clocks ## lines
Indicates the timing of the specified SDI input
to what is selected in the
Personality tab. The
display is in output format clocks and lines.
Output Timing ## Clocks ## lines
Indicates the relative timing of the output to
the selected reference signal
a. This field displays information in the format of <Input #>, <Format>, <Coded Frame>.
b. This field displays information in the format of <Format>, <Output Status>, <Coded Frame>, <AFD Code>.
c. The Output Frame Delay field may display a delay value of 1 even if the Output Frame Delay option in the Video tab is set to 0. This
is due to the automatic addition of 1 frame of delay that is required to process the output data.
Table 9.1 Signal Tab Items
Menu Title Item Parameters Description