Ross Opengear UDC-8625A Series, User Manual, Page: 24 / 174

2–4 • Installation UDC-8625A Series User Manual (Iss. 11)
Card-edge LEDs
This section describes the card-edge LEDs. Refer to Figure 2.3 for LED locations. Note that the
Audio Daughter Card is only available on the UDC-8625A-A and UDC-8625A-B.
Figure 2.3 Card-edge LEDs
Table 2.1 LEDs on the Card-edge
LED Color Display and Description
ERROR/OK
Green When this LED is green, the card is in normal operation with no errors.
Red When this LED is red, the card is experiencing internal errors.
Off When this LED is off, there is no power to the card.
SDI IN 1
Green When this LED is green, the SDI IN 1 video input is valid.
Red When this LED is red, the SDI IN 1 input is not present or is invalid.
SDI IN 2
Green When this LED is green, the SDI IN 2 video input is valid.
Red When this LED is red, the SDI IN 2 input is not present or is invalid.
SDI IN 3
Green When this LED is green, the SDI IN 3 input is valid.
Red When this LED is red, the SDI IN 3 input is not present or is invalid.
SDI IN 4
Green When this LED is green, the SDI IN 4 video input is valid.
Red
When this LED is red, the card is installed with a supported rear module
but the SDI IN 4 input is not present or is invalid.
Off
When this LED is off, the card is installed with the 8322AR-065 rear
module which only supports three SDI inputs.
REF STAT
Green When this LED is green, the reference signal is valid.
Red When this LED is red, the reference signal is not present or is invalid.
Card Ejector
Reset Button
Audio Daughter Card
ERROR/OK LED (DS1)
SDI IN 1 LED (DS2)
SDI IN 2 LED (DS3)
SDI IN 3 LED (DS4)
SDI IN 4 LED (DS5)
REF STAT LED (DS6)