Rohde & Schwarz R&S RTB2000 User Manual Download

Page: 198 / 609

General instrument setup

R&S

RTB2000

198

User Manual 1333.1611.02 ─ 11

To set date and time

1. Open the "Setup" menu.

2. Scroll down the menu. Tap "Date & Time".

3. Select the date: Scroll the year, month, and day columns until the required date is

displayed.

4. Select the time: Scroll the hour and minute columns until the required time is dis-

played.

5. If you do not want to see date and time on the display, disable "Display Date &

Time".

6. Tap "Save".

To set the language

1. Open the "Setup" menu.

2. Tap "Language".

3. Select the language.

The language is changed immediately.

Description of settings

Language

Selects the language in which the button labels and other screen information is dis-
played. The help is available only in English.

Remote command:

DISPlay:LANGuage

on page 450

Date & Time

Provides a dialog to set the current date and time in the instrument.

Remote command:

Setting the date, time and language

Summary of Contents for R&S RTB2000


































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R&S RTB2000

Reviews:

Related manuals for R&S RTB2000

Brands by name

Popular brands

Rohde & Schwarz R&S RTB2000, User Manual

Search results

Summary of Contents for R&S RTB2000

Reviews:

Related manuals for R&S RTB2000

Brands by name

Popular brands