Trigger
R&S
®
RTB2000
84
User Manual 1333.1611.02 ─ 11
Remote command:
And | Or
Sets the logical combination of the channel states.
"AND"
All defined states must be true.
"OR"
At least one of the defined states must be true.
Remote command:
Duration
The switch has the following two effects:
●
●
Enables or disables the
True | False
Defines whether the instrument triggers on fulfillment of the logical condition, or on vio-
lation.
●
= on, the instrument triggers when the logic combination "Is
True" or
"Is
False" for a specified time duration.
●
= off, the instrument triggers when the logic combination is found in the
signal ("Goes
True"), or if it disappears ("Goes
False").
Remote command:
Time limitation
To set a time limitation for the pattern, you have several possibilities. They are similar
to the setting of a pulse width, see
●
"Timeout" and "Time
t"
Define a minimum time during which the signals match the pattern condition.
●
"Width
>" or "Width
<" and "Time
t"
Triggers if the pattern condition changes before or after the specified time.
●
"Width
=", "Time
t1" and "Variation"
Triggers if the pattern condition is fulfilled for a duration "Time
t1" ± "Variation".
●
"Width
≠
", "Time
t1" and "Variation"
Triggers if the pattern condition is fulfilled for a duration shorter than "Time
t1" -
"Variation", or longer than "Time
t1" + "Variation".
●
"Inside", "Time
t1" and "Time
t2"
Triggers if the pattern condition is fulfilled for a duration between "Time
t1" and
"Time
t2". These settings are an alternative setting to the definition with "Width
=".
The time values are interdependent and adjusted accordingly.
●
"Outside", "Time
t1" and "Time
t2"
Triggers if the pattern condition is fulfilled for a duration shorter than "Time
t1", or
longer than "Time
t2". These settings are an alternative setting to the definition with
"Width
≠
". The time values are interdependent and adjusted accordingly.
Pattern trigger
