Rohde & Schwarz R&S RTB2000 User Manual Download

Page: 444 / 609

Remote control commands

R&S

RTB2000

444

User Manual 1333.1611.02 ─ 11

MMEMory:MSIS

<Drive>

Changes the default storage location (drive).

Parameters:

<Drive>

One of the available drives: /INT, or /USB_FRONT

Example:

MMEM:MSIS '/USB_FRONT'

Sets the USB flash drive connected to the front panel as storage
location.

MMEMory:MDIRectory

Creates a new directory with the specified name.

Setting parameters:

String parameter
Absolute path including the storage device, or relative to the cur-
rent directory.

Example:

Create directory DATA on the front USB flash device, with abso-
lute path:

MMEM:MDIR "/USB_FRONT/DATA"

Example:

Create directory JANUARY in the DATA directory, with relative
path:

MMEM:CDIR "/USB_FRONT/DATA/"
MMEM:MDIR "JANUARY"

Usage:

Setting only

MMEMory:CDIRectory

Specifies the current directory for file access. Before using the command, create the
directory with

MMEMory:MDIRectory

Setting parameters:

String parameter to specify the directory, including the storage
device.

Example:

MMEM:CDIR "/USB_FRONT/DATA"

Example:

Chapter 15.2.1.2, "Saving, copying, and loading setup data"

on page 304

MMEMory:RDIRectory

Deletes the specified directory.

Note:

All subdirectories and all files in the specified directory and in the subdirectories

will be deleted!

You cannot delete the current directory or a superior directory. In this case, the instru-
ment returns an execution error.

Documenting results

Summary of Contents for R&S RTB2000


































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R&S RTB2000

Reviews:

Related manuals for R&S RTB2000

Brands by name

Popular brands

Rohde & Schwarz R&S RTB2000, User Manual

Search results

Summary of Contents for R&S RTB2000

Reviews:

Related manuals for R&S RTB2000

Brands by name

Popular brands