Waveform setup
R&S
®
RTB2000
58
User Manual 1333.1611.02 ─ 11
[Math]
Displays the math waveforms with their last configuration. A math waveform is a wave-
form that is calculated from the captured data. The second keypress opens the menu,
where you can activate and configure math waveforms, and save and load equation
sets. If the menu is open, pressing the key disables the math waveforms.
4.3.2
Short menu for analog channels
To adjust the probe and the coupling, you can use the short menu. Here you can also
open the comprehensive menu, and switch off the channel.
► To open the short menu for a channel, tap the channel label in the bottom line of
the display.
If the channel was not selected, tap twice: Once to select the waveform, and next
to open the short menu.
Functions in the short menu:
●
"AC | DC": see
●
"<current bandwidth>" ("20MHz" in the above example): see
●
"Probe": opens the "Probe" menu, see
Chapter 4.4.2, "Probe settings"
●
"Auto Scale": analyzes the selected channel signal and adjusts the vertical scale.
This function is only available in the channel short menu.
●
"Off": turns off the channel.
●
"Menu": opens the channel menu.
4.3.3
Vertical settings
The comprehensive "Vertical" menu contains all vertical settings.
1. To open the "Vertical" menu:
a) Open the main menu.
Vertical setup
