Remote control commands
R&S
®
RTB2000
343
User Manual 1333.1611.02 ─ 11
Manual operation:
See
TRIGger:EVENt:REFSave
<SaveReference>
If ON, the instrument saves reference waveforms of all active channels, and activates
the references. This action works only with single acquisition.
The channels are assigned to the references: C1 to R1, C2 to R2 and so on. If a chan-
nel is off, the assigned reference is also not active.
If the history option is installed, and "Nx
Single" > 1, the waveforms of the last acquisi-
tion are saved as reference waveforms.
Parameters:
<SaveReference>
ON | OFF
*RST:
OFF
Manual operation:
See
TRIGger:EVENt:SCRSave
<SaveScreenshot>
If ON, the instrument saves a screenshot on each trigger event. The screenshot is
saved when the acquisition is complete. During saving, the acquisition stops, and
restarts when saving is finished. Thus, the waveform update rate decreases signifi-
cantly.
To set up the target directory, file name, color and file format, use the following com-
mands:
●
TRIGger:EVENt:SCRSave:DESTination
●
●
Parameters:
<SaveScreenshot>
ON | OFF
*RST:
OFF
Manual operation:
See
TRIGger:EVENt:SCRSave:DESTination
<File>
Defines the target directory and file name for a screenshot that is saved on trigger
event when
is ON.
Parameters:
<File>
String parameter
String with path and file name
Manual operation:
See
Trigger
