Rohde & Schwarz EX-IQ-BOX, User Manual

Page: 390 / 418

Annex
R&S
®
EX-IQ-BOX
375 User Manual 1409.5570.32 ─ 05
Parameter Default value
State Off
Total Samples 0.00 / 128 MSamples
Recorder
Parameter Default value
Data Source (signal_1)
Recording Length 100 Samples
State Off
Trigger Source Software
Trigger Position 0 Samples
A.4 Drawings
The following appendix contains the customer drawings of the user defined breakout
boards, where you can find the location of the connectors and the corresponding pin
assignments. See
​
chapter 10, "Interfaces" , on page 355 for description on the interfaces
and breakout boards.
Included drawings:
●
C-6367557
Tyco Z-Dok Adapter Board Connector, (56 differential pairs), see also
​
chapter 10.1,
"User Interface of the R&S EX-IQ-BOX" , on page 355.
●
3585.7280.00
Single Ended Breakout Board with connector X1, the User Interface, and the con-
nectors X2 and X3 (2x25 pole), see
​
chapter 10.3.1.1, "Breakout Board Single Ended
3585.7280.00" , on page 359.
●
3585.7296.00
Differential Breakout Board, with connector X1, the User Interface, and the connec-
tors X2 and X3 (2x50 pole), see
​
chapter 10.3.1.2, "Breakout Board Differential
3585.7296.00" , on page 361.
●
090101-331-25AEZ00
Cadence Palladium Breakout Board with connector X1, the User Interface, and the
connector X2 (1x68 pole SCSI), see
​
chapter 10.3.1.3, "Breakout Board Cadence
Palladium 090002-24x" , on page 364.
Drawings