Interfaces
R&S
®
EX-IQ-BOX
364
User Manual 1409.5570.32 ─ 05
Pin Number
Signal Name
Comment
Pin Number
Signal Name
Comment
X2.93, X2.94
GND
interface clock
output
X3.93, X3.94
GND
interface clock
input
X2.95
D_CLK_UOUT
_N
X3.95
D_CLK_UIN_N
X2.96
D_CLK_UOUT
_P
X3.96
D_CLK_UIN_P
X2.97, X2.98
GND
indicates valid
data blocks
X3.97, X3.98
GND
X2.99
UI_VALID_N
X3.99
n.c.
X2.100
UI_VALID_P
X3.100
n.c.
The signal UI_VALID_P/N must be active in receiver mode. This clock signal is required
as a reference for PLL. Therefore, it must be active continuously.
Information on the pinouts of the connectors - Differential breakout board
Find a detailed pin assignment to this breakout board in the appendix of the operating
manual, drawing number 3585.7296.00. The drawing covers the user interface, connec-
tor X1 as well as the connectors X2 and X3.
10.3.1.3
Breakout Board Cadence Palladium 090002-24x
This breakout board, option R&S EXBOX-Z3 consists of the connector to the R&S
EX-
IQ-BOX and one connector for adjusting the external user signals.
The breakout board is used for signal transmission between a cadence palladium emu-
lator and R&S measurement equipment. The signals are assigned to a 68-pole SCSI
connector.
Type:
68-pole D Subminiatur SCSI connector
Manufacturer:
Tyco Electronics
Part number:
787170-7
Breakout Boards
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
