Getting Started
R&S
®
EX-IQ-BOX
33
User Manual 1409.5570.32 ─ 05
Connectors for the input or output of the digital I/Q signal. The R&S
EX-IQ-BOX covers
two digital interfaces; both ports can be used for either signal input or output.
One cable for the connection between the digital I/Q interfaces of the R&S
EX-IQ-BOX
and an R&S instrument is included in delivery. Additional cables are available separately.
Refer to
, on page 24 for the R&S part number of the asso-
ciated cable.
4.3.2.4
LAN - Interface
The LEDs at the top indicate activity and status of the interface.
●
Green
: a link is active.
●
Yellow
: transmission is active.
The LAN connector is intended for future use and it is not possible to directly remote-
control the R&S
EX-IQ-BOX via this interface. Data and settings of the R&S
EX-IQ-BOX
are controlled via the USB interface.
The R&S
EX-IQ-BOX is connected to the LAN with the aid of a commercial RJ-45 CAT7
cable. The interface supports 10/100/1000Mbps Ethernet IEEE 802.3u.
4.3.2.5
USB IN - USB interface type B
U
niversal
S
erial
B
us interface of type B (device "USB"). This port is used for communi-
cation with the host instrument.
The interface supports two data rates:
●
High-speed data rate of 480 Mbit/s.
●
Full-speed rate of 12 Mbit/s.
An USB cable for the connection is included in delivery.
Control Elements and Connectors
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
