Rohde & Schwarz EX-IQ-BOX, User Manual

Page: 83 / 418

R&S EX-IQ-BOX Configuration
R&S
®
EX-IQ-BOX
68 User Manual 1409.5570.32 ─ 05
<part number>-<serial number>-<checksum>
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
ID?
​
on page 250
Installed Options ← Options
Lists all options the R&S EX-IQ-BOX is equipped with. The first column shows the R&S
option type, and the second contains a short description.
Note: Only the R&S EX-IQ-BOX variant 1409.5505K04 supports the enlarged function-
ality of the additionally available options.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
OPT
​
on page 250
Enter License Key ← Options
Type here the license key provided with the option.
For license key delivered as a file, use
For description on how to install a new option refer to
​
chapter 4.6, "Installing R&S EX-
IQ-BOX Options" , on page 44.
Import License Key From File ← Options
Opens a file manager dialog for selecting the file with the license key.
Export Deactivation Response To File ← Options
Exports the generated deactivation response key to a file. A file management dialog
opens for storing the file.
This key is required during the unregistration process.
Note: If you want o register an option at another R&S EX-IQ-BOX, you must request a
new license key code for the instrument, see
​
Device ID .
Status Information ← Options
Displays status information about the license process.
Update EX-IQ-BOX Firmware
This section is displayed in the device manager dialog of an R&S EX-IQ-BOX
1409.5505.02 . It indicates the installed as well as the currently available firmware version
and provides an update.
FW versions Information
"This software supports ver-
sion" Indicates the firmware available in the current software of the R&S DigIConf.
"Installed version"
Indicates the currently installed firmware version in the R&S EX-IQ-BOX.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
DEVice:
​
FIRMware:
​
SUPPorted?
​
on page 243
R&S DigIConf Configuration Software