R&S EX-IQ-BOX Configuration
R&S
®
EX-IQ-BOX
62
User Manual 1409.5570.32 ─ 05
Delete
Clears the highlighted message.
This button is available only if the history of the messages is displayed.
Delete all
Clears all messages.
This button is available only if the history of the messages is displayed.
Del. volatile
Clears all volatile messages.
This button is available only if the history of the messages is displayed.
Show History /Show Static
Calls the list of all messages that have occurred since instrument switch-on. The most
recent messages are displayed at the top of the list. When the softkey is pressed again,
the list of current messages is displayed.
6.1.4 Blocks
The block diagram shows the current configuration and signal flow and permits interactive
operation via graphical elements. The diagram indicates a separate block for each con-
neced R&S
EX-IQ-BOX, and other R&S instruments.
The DUT is displayed as passive block, just representing the device under test.
6.1.4.1
R&S EX-IQ-BOX
An R&S
EX-IQ-BOX function block provides access to the settings of the corresponding
standard transmission protocol, determined by the connected breakout board.
R&S
DigIConf may handle up to four connected R&S
EX-IQ-BOXes, each displayed in
a separate block. Each block automatically displays the essential information on the
R&S
EX-IQ-BOX and the transmission protocol.
Fig. 6-2: R&S DigIConf EX-IQ-BOX in the block diagram
1 = block label
1 = config button
1 = On checkbox
In this block, a R&S
EX-IQ-BOX is configured and activated.
R&S DigIConf Configuration Software
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
