Interfaces
R&S
®
EX-IQ-BOX
355
User Manual 1409.5570.32 ─ 05
10 Interfaces
The following chapters describe the characteristics of the user interface and the available
breakout boards.
10.1 User Interface of the R&S EX-IQ-BOX
The user interface depends on the selected protocol, i.e. the functions of the pins change
depending on the standard.
The pin description and pinout table in the following chapters refer to the user interface
of
User Defined
protocols, i.e. for single ended or differential applications. For these
applications the user interface provides the transmission of serial or parallel I/Q data,
data clock and control signals.
10.1.1 Z-DOK-Adapter Board Connector
Type:
Z-DOK-Adapter Board Connector
Manufacturer:
Tyco Electronics
Part number:
6367557-1
10.1.2 Pin Description
The user interface consists of a specific and a common part. In the specific part the pins
are assigned individually for each breakout board. They are located on the left and the
right side of the connector. The common part with fixed pin assignment is located in the
middle of the connector.
The pin assignment of the specific part is defined by designing the layout of the breakout
boards.
The common pin assignment is shown in
Pinout Z-DOK-Adapter Board Connector (User
. Additionally, the specific pin assignments of the user interface are shown in
the respective drawings of the breakout boards, which are attached to the operating
manual.
User Interface of the R&S EX-IQ-BOX
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
