Remote Control Commands
R&S
®
EX-IQ-BOX
289
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:CONFlict?
The command queries whether an option conflict has occurred. A conflict arises, if a
waveform requires an option, that is not installed on the R&S
EX-IQ-BOX, or is not
enabled.
Return values:
<Oconflict>
OFF | ON
*RST:
OFF
Example:
SOUR1:EBOX:CPRI:ARB:CONF?
check if there is an option conflict.
Response:
0
if OK,
1
if not OK
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:FILE
<File>
The command selects a stored waveform file. Enter directory and file name with the file
extension
*.wv
for waveform files.
Parameters:
<File>
<path>, <file_name>.<ext>
String parameter containing the directory, where the waveform file
is located, the file name, and the file extension
*.wv
for waveform
files.
Example:
SOUR1:EBOX:CPRI:ARB2:FILE
"..\\DigIConf\Waveforms\p4DQPSK7.wv"
load the file "waveform" into the second ARB waveform memory.
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:SAMPles?
The command queries the number of samples the loaded signal is composed of.
Return values:
<Samples>
integer
Increment: 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:ARB1:SAMPl?
query the samples of the signal loaded in ARB1 waveform mem-
ory.
Response:
122.88
the current sample rate is 122.88 Mbit/s
Usage:
Query only
CPRI Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
