Remote Control Commands
R&S
®
EX-IQ-BOX
327
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:TEST:RX:SDI?
The command queries if the data communication failed (SDI
S
ervice Access Point
D
efect
I
ndication).
Return values:
<Sdi>
0 | 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:RX:SDI?
check the data communication.
Response:
1
(error)
data communication failed.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TEST:SFP<st>:INFO?
The command provides information on all SFP module parameters.
Return values:
<Info>
string
Example:
SOUR1:EBOX:CPRI:TEST:SFP:INFO?
query all parameters of the SFP1 module.
Response:
'Vendor:R&S, Part number:
90567, 'Connector:LC, 'Bit Rate:
2400kbit/s, 'Wave Length:1024,...'
.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TEST:SFP<st>:LOS?
Queries whether data communication via the SFP module failed and the signal was lost.
Return values:
<Sloss>
0 | 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:SFP1:LOS?
check whether the data was transferred correctly through the
SFP1 module, or whether the signal was lost.
Response:
0
if OK,
1
if not OK
Usage:
Query only
Manual operation:
See
CPRI Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
